1 ecl pro sy10ep05v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 pin function d 0 , d 1 , /d 0 , /d 1 ecl data inputs q, /q ecl data outputs description 3.3v or 5v power supply options 180ps typical propagation delay maximum frequency >3ghz typical internal input resistors: pulldown on d, pulldown and pullup on /d q output will default low with inputs open or at v ee transistor count: 126 available in 8-pin msop and soic packages the sy10ep05v is a 2-input differential and/nand gate. the device is functionally equivalent to the el05 device. with ac performance much faster that the el05 device, the ep05v is ideal for applications requiring the fastest ac performance available. features 5v/3.3v differential and/nand pin names ecl pro sy10ep05v rev.: d amendment: /0 issue date: november 2005 d 0 d 1 /d 0 /d 1 q/q llhhlh lhh llh hll hlh hhl lhl truth table ecl pro is a trademark of micrel, inc. ecl pro
2 ecl pro sy10ep05v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 package/ordering information ordering information (1) package operating package lead part number type range marking finish sy10ep05vzc z8-1 commercial hep05v sn-pb sy10ep05vzctr (2) z8-1 commercial hep05v sn-pb sy10ep05vkc k8-1 commercial hp05 sn-pb sy10ep05vkctr (2) k8-1 commercial hp05 sn-pb sy10ep05vzi z8-1 industrial hep05v sn-pb sy10ep05vzitr (2) z8-1 industrial hep05v sn-pb sy10ep05vki k8-1 industrial hp05 sn-pb sy10ep05vkitr (2) k8-1 industrial hp05 sn-pb sy10ep05vzg (3) z8-1 industrial hep05v with pb-free pb-free bar-line indicator nipdau SY10EP05VZGTR (2, 3) z8-1 industrial hep05v with pb-free pb-free bar-line indicator nipdau sy10ep05vkg (3) k8-1 industrial hp05 with pb-free pb-free bar-line indicator nipdau sy10ep05vkgtr (2, 3) k8-1 industrial hp05 with pb-free pb-free bar-line indicator nipdau notes: 1. contact factory for die availability. dice are guaranteed at t a = 25 c, dc electricals only. 2. tape and reel. 3. pb-free package is recommended for new designs. 1 d0 /d0 d1 /d1 8 vcc q /q vee 7 6 5 2 3 4 available in 8-pin soic and msop packages
3 ecl pro sy10ep05v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 symbol rating value unit v cc ? ee power supply voltage 6v v v in input voltage (v cc = 0v, v i not more negative than v ee ) ?.0 to 0 v input voltage (v ee = 0v, v i not more positive than v cc ) +6.0 to 0 v i out output current ?ontinuous 50 ma ?urge 100 t lead lead temperature +260 c t a operating temperature range ?0 to +85 c t store storage temperature range ?5 to +150 c ja package thermal resistance ?till-air (soic) 160 c/w (junction-to-ambient) ?00lfpm (soic) 109 ?till-air (msop) 206 c/w ?00lfpm (msop) 155 jc package thermal resistance (soic) 39 c/w (junction-to-case) (msop) 39 note 1. permanent device damage may occur if absolute maximum ratings are exceeded. this is a stress rating only and functional operat ion is not implied at conditions other than those detailed in the operational sections of this data sheet. exposure to absolute maximum r atlng conditions for extended periods may affect device reliability. absolute maximum ratings (1) t a = ?0 ct a = +25 ct a = +85 c symbol parameter min. typ. max. min. typ. max. min. typ. max. unit i ee power supply current (3) 22 29 24 29 22 29 ma v oh output high voltage (4) 3865 3940 4115 3930 4055 4180 3990 4115 4240 mv v ol outuput low voltage (4) 3050 3190 3315 3050 3255 3380 3050 3315 3440 mv v ih input high voltage 3790 4115 3855 4180 3915 4240 mv v il input low voltage 3065 3390 3130 3455 3190 3515 mv v ihcmr input high voltage 2.0 v cc 2.0 v cc 2.0 v cc v common mode range i ih input high current 150 150 150 a i il input low current d 0.5 0.5 0.5 a /d ?50 ?50 ?50 note 1. 10ep circuits are designed to meet the dc specifications shown in the above table after thermal equilibrium has been establishe d. the circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. note 2. input and output parameters vary 1:1 with v cc . note 3. v cc = 0v, v ee = v ee (min) to v ee (max), all other pins floating. note 4. all loading with 50 ? to v cc ?.0v. pecl dc electrical characteristics (1) v cc = 4.5v to 5.5v; v ee = 0v (2)
4 ecl pro sy10ep05v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 t a = ?0 ct a = +25 ct a = +85 c symbol parameter min. typ. max. min. typ. max. min. typ. max. unit i ee power supply current (3) 22 29 22 29 24 29 ma v oh output high voltage (4) 2165 2240 2415 2230 2355 2480 2290 2415 2540 mv v ol outuput low voltage (4) 1350 1490 1615 1350 1555 1680 1350 1615 1740 mv v ih input high voltage 2090 2415 2155 2480 2215 2540 mv v il input low voltage 1365 1690 1430 1755 1490 1815 mv v ihcmr input high voltage 2.0 v cc 2.0 v cc 2.0 v cc v common mode range i ih input high current 150 150 150 a i il input low current d 0.5 0.5 0.5 a /d ?50 ?50 ?50 note 1. 10ep circuits are designed to meet the dc specifications shown in the above table after thermal equilibrium has been establishe d. the circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. note 2. input and output parameters vary 1:1 with v cc . note 3. v cc = 0v, v ee = v ee (min) to v ee (max), all other pins floating. note 4. all loading with 50 ? to v cc ?.0v. lvpecl dc electrical characteristics (1) v cc = 3.0v to 3.6v; v ee = 0v (2) t a = ?0 ct a = +25 ct a = +85 c symbol parameter min. typ. max. min. typ. max. min. typ. max. unit i ee power supply current (3) 22 29 22 29 22 29 ma v oh output high voltage (4) ?135 1060 ?85 ?070 ?45 ?20 ?010 ?85 ?60 mv v ol outuput low voltage (4) ?950 1810 1685 1950 1745 ?620 ?950 ?685 ?560 mv v ih input high voltage ?210 ?85 ?145 ?20 ?085 ?60 mv v il input low voltage ?935 ?610 1870 ?545 ?810 ?485 mv v ihcmr input high voltage v ee +2.0 v cc v ee +2.0 v cc v ee +2.0 v cc v common mode range i ih input high current 150 150 150 a i il input low current d 0.5 0.5 0.5 a /d ?50 ?50 ?50 note 1. 10ep circuits are designed to meet the dc specifications shown in the above table after thermal equilibrium has been establishe d. the circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. note 2. input and output parameters vary 1:1 with v cc . note 3. v cc = 0v, v ee = v ee (min) to v ee (max), all other pins floating. note 4 . all loading with 50 ? to v cc ?.0v. ecl/lvecl dc electrical characteristics (1) v cc = 0v, v ee = ?.5v to ?.0v (2)
5 ecl pro sy10ep05v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 t a = ?0 ct a = +25 ct a = +85 c symbol parameter min. typ. max. min. typ. max. min. typ. max. unit f max maximum toggle frequency (1) 3.0 3.0 3.0 ghz t plh propagation delay to t phl output differential d ? q, /q 160 180 260 160 180 260 160 180 260 ps t jitter cycle-to-cycle jitter tbd ps v pp input voltage swing (diff.) 150 800 1200 150 800 1200 150 800 1200 mv t r output rise/fall times q 70 170 80 130 180 100 200 ps t f (20% to 80%) note 1. f max guaranteed for functionality only. v ol and v oh levels are guaranteed at dc only. ac electrical characteristics v cc = 0v, v ee = ?.5v to ?.0v; v cc = 3.0v to 5.5v, v ee = 0v
6 ecl pro sy10ep05v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 8-pin msop (k8-1) rev. 01
7 ecl pro sy10ep05v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 8-pin plastic soic (z8-1) rev. 03 micrel, inc. 2180 fortune drive san jose, ca 95131 usa tel + 1 (408) 944-0800 fax + 1 (408) 474-1000 web http://www.micrel.com the information furnished by micrel in this datasheet is believed to be accurate and reliable. however, no responsibility is as sumed by micrel for its use. micrel reserves the right to change circuitry and specifications at any time without notification to the customer. micrel products are not designed or authorized for use as components in life support appliances, devices or systems where malfu nction of a product can reasonably be expected to result in personal injury. life support devices or systems are devices or systems that (a) are intend ed for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant inj ury to the user. a purchaser? use or sale of micrel products for use in life support appliances, devices or systems is at purchaser? own risk and purchaser agrees to fully indemnify micrel for any damages resulting from such use or sale. ?2005 micrel, incorporated.
|
